Terms of Use & Trade Disclaimers
Please review these terms before relying on calculations, material lists, or layout schematics generated on FreeTileCalculator.com.
By accessing or using our calculation engines, visualizers, or shopping list utilities, you acknowledge and agree to the guidelines, physical tolerances, and limitations outlined below.
Core Terms at a Glance
Calculations, material bills, and cut layouts provided by FreeTileCalculator.com are mathematical approximations intended to guide purchasing and preliminary job planning. They do not substitute for on-site physical measurement or professional architectural specification.
Substrates in residential homes are almost never perfectly square, plumb, or level. You must dry-fit a minimum of two rows along both axes of the room to verify perimeter cut sizes and pattern alignment prior to mixing thin-set mortar.
Ceramic and porcelain tiles vary slightly in shade, texture, and physical dimension between production batches (calibers). Users are strongly advised to purchase their entire requirement plus 10%–20% pattern-specific waste from a single continuous factory run.
Wet-area waterproofing (showers, steam rooms, curbless transitions) and subfloor deflection limits must comply with local building codes, manufacturer technical data sheets (TDS), and applicable TCNA / ANSI A108 standards.
1. Purpose & Scope of Services
FreeTileCalculator.com provides mathematical calculators, visual pattern planners, cut layout guides, and preliminary bill-of-materials generators for DIY homeowners, interior renovators, and trade contractors.
All tools and content are provided for informational and planning purposes only. We do not act as licensed architects, structural engineers, or general contractors. Nothing on this website constitutes a formal architectural plan, an engineering stamp, or a guaranteed installation warranty.
2. Real-World Substrate & Job Site Variances
Mathematical models assume geometric perfection: 90-degree corners, plumb walls, and perfectly level floors. In real residential construction:
- Walls Out of Square: Framing lumber warps and sheetrock corners rarely form true 90-degree right angles. A room that measures 120 inches along the baseboard may measure 121.5 inches three feet higher.
- Floor Deflection & Flatness: The Tile Council of North America (TCNA) recommends that substrates for large-format tiles (any side ≥ 15") have no more than 1/8" deviation in 10 feet. Subfloors requiring self-leveling underlayment or extra thin-set bedding will consume more mortar than standard theoretical coverage figures.
- Cutting Wastage Variances: Intricate cuts around toilet flanges, plumbing supply lines, heating vents, electrical outlets, niche jambs, and outside corner bullnose trims generate unavoidable scrap.
You acknowledge that field-measuring with a tape measure, laser level, and chalk line before purchasing materials remains your sole responsibility.
3. Permitted Use & Intellectual Property
You are granted a non-exclusive, revocable, royalty-free license to use FreeTileCalculator.com for personal or professional project planning, including:
- Generating and printing shopping lists for hardware and tile distributor runs.
- Using pattern visualizers to assist clients or homeowners in selecting layout configurations.
- Referencing our educational formulas in vocational schools or DIY guides with proper attribution.
You may not reverse-engineer our proprietary SVG visual layout generators, copy the site source code to deploy competing commercial mirrors, or deploy automated scrapers/bots that degrade site performance.
4. Limitation of Liability
To the maximum extent permitted by applicable law, FreeTileCalculator.com, its authors, contributors, and operators shall not be held liable for:
- Material shortages, backorder delays, or mismatched dye-lot discrepancies.
- Over-purchased materials, restocking fees, or transportation return costs.
- Installation failures, tile lippage, cracked grout, water leakage, or mold damage resulting from improper substrate preparation or waterproofing.
- Contractor labor disputes or discrepancies between our national labor estimates and local contractor bids.
Our services are provided on an "AS-IS" and "AS-AVAILABLE" basis without warranties of any kind, whether express or implied.
5. Contact Information
If you have questions regarding these Terms & Conditions or wish to report a mathematical calculation concern, please reach out to: